RG-5440G-Wac

WAN status

Interface	Connection Type	VLAN ID	MAC Address	IP Address	Gateway	Default	DNS Servers	Status
ppp0_nas0_0	PPPoE	—	EC:B1:E0:00:4B:A8	—	—		—	Enabled
nas0_1	IPoE	—	EC:B1:E0:00:4B:A9	—	—		—	Enabled

PPTP status

No active connection

L2TP status

No active connection

This page displays information about the WAN interface of the device

WAN Status: The information about the set up WAN connections
PPTP status: The information about the set up PPTP VPN tunnels
L2TP status: The information about the set up L2TP VPN tunnels

Operation Mode

Gateway

LAN status

Interface

br0

IPv4 Address

192.168.1.1/24

DHCP Mode

Server

MAC Address

EE:B1:E0:00:4B:B0

Local IPv6 Address

fe80::ecb1:e0ff:fe00:4bb0/64

Local IPv6 Address

fe80::1/64

DHCPv4 Clients

Name	IP Address	MAC Address	Lease Time, s	Interface
DESKTOP-A02RT9K	192.168.1.73	F0:79:59:8E:93:F7	86179	Wired Connection LAN3 (eth0.4)

DHCPv6 Clients There are no connected devices

This page displays information about the local network of the device

Operation Mode: The selected device operation mode
LAN Status: The information about the device local interface
WAN/LAN Status: The information about the device local interfaces
DHCPv4 Clients: The list of connected clients via DHCP
DHCPv6 Clients: The list of connected clients via DHCPv6

Wi-Fi Status

5 GHz

VAP1

VAP2

VAP3

VXD

Access Point Wi-Fi 5 GHz (wlan0)

State

Enabled

Mode

Access Point

Range

5 GHz (A+N+AC)

SSID

RT-5WiFi-4ba8

Channel Number

48

Encryption

WPA2

BSSID

EE:B1:E0:00:4B:A8

Clients List

Current AP All APs

There are no connected devices

This page displays information about the wireless interfaces of the device

Wi-Fi Status: The basic router Wi-Fi network parameters information in the 5 GHz band; tabs group information by wireless interfaces in the selected band, the tab will become active if the selected wireless interface is enabled; virtual access points can be enabled on the page Wi-Fi - Virtual APs
Clients List: The router wireless clients list
Current AP: Displays only the selected wireless interface clients list
All APs: Displays the clients list of all the wireless interfaces of the selected band

Enable VLAN: When checked, allows the use of 802.1Q tags
Enable Multicast VLAN ID: When checked, allows the use of 802.1Q tags for multicast
Connection Type: Selecting the protocol used by the device WAN interface for connecting to the Internet service provider network:

IPoE — the mode in which the device routes traffic with or without NAT; network settings can be obtained from a DHCPv4 server/DHCPv6 server/RADVD or configured manually;

Bridged — the network bridge mode; network settings can be obtained from a DHCPv4 server or configured manually;

PPPoE — the mode that starts a PPPoE session on the WAN interface; network settings can be obtained from PPPoE server/DHCPv6 server/RADVD;

6rd — the mode that allows providing access to an IPv6 network over an existing IPv4 network.
Enable NAPT: Enabling the network address and port translation
Enable QoS: Enabling the QoS function for the current WAN
Service Type: INTERNET — provides internet access;

TR069 — enables the TR-069 client on the interface;

TR069_INTERNET — provides internet access and enables the TR-069 client on the interface
MTU: Maximum packet size in bytes
Default Route: When checked, the default route will be set for the current WAN; the default route can belong only to a single WAN
Enable IGMP Proxy without encapsulation: IGMP packets will be sent from WAN without encapsulation in the PPPoE tunnel with the 0.0.0.0 source address
Enable IGMP Proxy with encapsulation: IGMP packets will be sent into the PPPoE tunnel like regular traffic
Enable MLD Proxy: Enabling MLD Proxy for monitoring and translating multicast
IP Protocol: Selecting the network protocols used for the current WAN:

IPv4 — the network access mode over IPv4;

IPv6 — the network access mode over IPv6;

IPv4/IPv6 — the Dual Stack network access mode over both IPv4 and IPv6.
MAC Address: The function of cloning the MAC address of the current WAN
Restore Factory MAC Address: The function of restoring the factory MAC address of the current WAN
Username: The user name for authorization on the PPPoE server
Password: The password for authorization
PPPoE Connection Type: Selecting the PPPoE connection type:

Continuous — the PPPoE session is set up permanently;

On demnand — the PPPoE session is set up in case the network activity is detected and is set down in case of its absence due to idle time;

Manually — the PPPoE session is established/disconnected manually by activating the "Connect/Disconnect tunnel" button on the PPPoE WAN interface card.
Authentication Method: AUTO — automatic selection of authentication type depending on the server;

PAP (Password Authentication Protocol) — verification protocol that sends a username and password to an authentication server without encryption;

CHAP (Challenge Handshake Authentication Protocol) — verification protocol with negotiation, the user's password is encrypted, and authentication takes place in three stages;

MSCHAP — negotiated verification protocol where Server and Client verifications are mutually exchanged;

MSCHAPV2 — improved version of MSCHAP;

EAP (Extensible Authentication Protocol) — the protocol that defines the structure of authentication with the transfer of keys and their processing for wireless networks and point-to-point connections.
Access Concentrator Name: The value of the Host-Uniq tag in the PADI message that specifies the name of the Access Concentrator (optional field)
Service Name: The value of the Service Name tag in the PADI message (optional field)
Get DNS automatically: If the flag is set, DNS settings will be received automatically from configuration or PPPoE server
IPv6 Assignment Method: Stateful DHCPv6 — mode with configuring the address and network settings over DHCPv6, the gateway is acquired over ICMPv6; routing and prefix delegation to the local network are provided; Stateless DHCPv6+SLAAC — the mode of operation with address configuration via ICMPv6 and DHCPv6. The gateway is set to ICMPv6; routing and prefix delegation in the local network are provided;
SLAAC — the mode with setting the address and network settings via ICMPv6; routing and prefix delegation to the local network are possible only through setting the fixed prefix on LAN; Fixed IP — the mode with configuring the address and network parameters manually; routing and prefix delegation to the local network are possible only through setting the fixed prefix on LAN; Autodetection — the mode with the automatic configuration of the address and network settings via ICMPv6/DHCPv6; routing and prefix delegation to the local network are provided:

Get DNS automatically — when checked, DNS settings will be obtained via ICMPv6/DHCPv6 (depending on the settings in the router advertisement);

Preferred DNS Server — setting the main DNS server address;

Alternative DNS Server — setting the additional DNS server address;

DS-Lite — technology which set the address that allows IPv4 access without chainging user software.
IPv6 Assignment Method: Stateful DHCPv6 — mode with configuring the address and network settings over DHCPv6, the gateway is acquired over ICMPv6; routing and prefix delegation to the local network are provided; Stateless DHCPv6+SLAAC — the mode of operation with address configuration via ICMPv6 and DHCPv6. The gateway is set to ICMPv6. Routing and prefix delegation in the local network are provided:
Get DNS automatically — when checked, DNS settings will be obtained via ICMPv6/DHCPv6 (depending on the settings in the router advertisement);

Preferred DNS Server — setting the main DNS server address;

Alternative DNS Server — setting the additional DNS server address;

DS-Lite — technology which set the address that allows IPv4 access without chainging user software.
SLAAC — the mode with setting the address and network settings via ICMPv6; routing and prefix delegation to the local network are possible only through setting the fixed prefix on LAN; Fixed IP — the mode with configuring the address and network parameters manually; routing and prefix delegation to the local network are possible only through setting the fixed prefix on LAN; Autodetection — the mode with the automatic configuration of the address and network settings via ICMPv6/DHCPv6; routing and prefix delegation to the local network are provided.
IPv6 Assignment Method: Stateful DHCPv6 — mode with configuring the address and network settings over DHCPv6, the gateway is acquired over ICMPv6; routing and prefix delegation to the local network are provided:
Get DNS automatically — when checked, the DNS settings will be obtained via DHCPv6,

Preferred DNS Server — setting the main DNS server address;

Alternative DNS Server — setting the additional DNS server address;

Request IANA — request a non-temporary address via DHCPv6;

Request IAPD — request prefix delegation via DHCPv6;

DS-Lite — technology which set the address that allows IPv4 access without chainging user software.
Stateless DHCPv6+SLAAC — the mode of operation with address configuration via ICMPv6 and DHCPv6. The gateway is set to ICMPv6. Routing and prefix delegation in the local network are provided;
SLAAC — the mode with setting the address and network settings via ICMPv6; routing and prefix delegation to the local network are possible only through setting the fixed prefix on LAN; Fixed IP — the mode with configuring the address and network parameters manually; routing and prefix delegation to the local network are possible only through setting the fixed prefix on LAN; Autodetection — the mode with the automatic configuration of the address and network settings via ICMPv6/DHCPv6; routing and prefix delegation to the local network are provided.
IPv6 Assignment Method: Stateful DHCPv6 — mode with configuring the address and network settings over DHCPv6, the gateway is acquired over ICMPv6; routing and prefix delegation to the local network are provided; Stateless DHCPv6+SLAAC — the mode of operation with address configuration via ICMPv6 and DHCPv6. The gateway is set to ICMPv6. Routing and prefix delegation in the local network are provided;
SLAAC — the mode with setting the address and network settings via ICMPv6; routing and prefix delegation to the local network are possible only through setting the fixed prefix on LAN:
Get DNS automatically — when checked, the DNS settings will be obtained via ICMPv6;

Preferred DNS Server — setting the main DNS server address;

Alternative DNS Server — setting the additional DNS server address;

DS-Lite — technology which set the address that allows IPv4 access without chainging user software.
Fixed IP — the mode with configuring the address and network parameters manually; routing and prefix delegation to the local network are possible only through setting the fixed prefix on LAN; Autodetection — the mode with the automatic configuration of the address and network settings via ICMPv6/DHCPv6; routing and prefix delegation to the local network are provided.
IPv6 Assignment Method: Stateful DHCPv6 — mode with configuring the address and network settings over DHCPv6, the gateway is acquired over ICMPv6; routing and prefix delegation to the local network are provided; Stateless DHCPv6+SLAAC — the mode of operation with address configuration via ICMPv6 and DHCPv6. The gateway is set to ICMPv6. Routing and prefix delegation in the local network are provided;
SLAAC — the mode with setting the address and network settings via ICMPv6; routing and prefix delegation to the local network are possible only through setting the fixed prefix on LAN; Fixed IP — the mode with configuring the address and network parameters manually; routing and prefix delegation to the local network are possible only through setting the fixed prefix on LAN;
IPv6 Address — the input field for the device WAN interface IP address in an ISP network;

IPv6 Gateway — the default gateway address the packet is sent to unless the route for the packet is found in the routing table;

Ipv6 Address Prefix Len — the external network prefix input field;

DS-Lite — technology which set the address that allows IPv4 access without chainging user software.
Autodetection — the mode with the automatic configuration of the address and network settings via ICMPv6/DHCPv6; routing and prefix delegation to the local network are provided.
Bridge Group: A set of local interfaces combined into a group and using the current WAN interface; bridge group editing is available in the table below