Eltex
RG-5440G-Wac
IPv4 Network Settings

br0

This page is used for configuring the device local area network

DHCP
The DHCP mode, default is the DHCP server
IP Address
The local IP address of the device, it is the default gateway address for connected clients
Subnet Mask
The LAN subnet mask value
IP Pool Range Start Address
The value of the start IP address, starting from which addresses will be allocated to clients; the address must be within the range of the selected network
IP Pool Range End Address
The end IP address that the device can allocate to the client; upon reaching it, the pool is considered exhausted until the already occupied address is released; the address must be within the range of the selected network
DHCP Lease Time
The lease time input field in minutes, after which the client must either release the address or renew the address lease for the same period
Domain Name
The DHCP server domain name input field
Default Gateway
The gateway address where a packet is sent to when the route to the destination net of a packet is unknown
DNS Mode
Ethernet to Wi-Fi Isolation
When this setting is enabled, wired clients will be isolated from wireless ones