RG-5440G-Wac

Ethernet WAN

This page is used to configure the WAN interfaces of the device

Connection Type: The protocol used by the device WAN interface for connecting to the Internet service provider network
VLAN ID: The VLAN number used by the current WAN interface
MAC Address: The MAC address of the current WAN interface
IPv4 Address: The IPv4 Address of the current WAN interface
IPv6 Address: The IPv6 Address of the current WAN interface
ACS Server: The ACS Server address connected to via the current WAN interface

WAN status

Interface	Connection Type	VLAN ID	MAC Address	IP Address	Gateway	Default	DNS Servers	Status
ppp0_nas0_0	PPPoE	—	EC:B1:E0:00:4B:A8	—	—		—	Enabled
nas0_1	IPoE	—	EC:B1:E0:00:4B:A9	—	—		—	Enabled

PPTP status

No active connection

L2TP status

No active connection

This page displays information about the WAN interface of the device

WAN Status: The information about the set up WAN connections
PPTP status: The information about the set up PPTP VPN tunnels
L2TP status: The information about the set up L2TP VPN tunnels

Operation Mode

Gateway

LAN status

Interface

br0

IPv4 Address

192.168.1.1/24

DHCP Mode

Server

MAC Address

EE:B1:E0:00:4B:B0

Local IPv6 Address

fe80::ecb1:e0ff:fe00:4bb0/64

Local IPv6 Address

fe80::1/64

DHCPv4 Clients

Name	IP Address	MAC Address	Lease Time, s	Interface
DESKTOP-A02RT9K	192.168.1.73	F0:79:59:8E:93:F7	85001	Wired Connection LAN3 (eth0.4)

DHCPv6 Clients There are no connected devices

This page displays information about the local network of the device

Operation Mode: The selected device operation mode
LAN Status: The information about the device local interface
WAN/LAN Status: The information about the device local interfaces
DHCPv4 Clients: The list of connected clients via DHCP
DHCPv6 Clients: The list of connected clients via DHCPv6

Wi-Fi Status

5 GHz

VAP1

VAP2

VAP3

VXD

Access Point Wi-Fi 5 GHz (wlan0)

State

Enabled

Mode

Access Point

Range

5 GHz (A+N+AC)

SSID

RT-5WiFi-4ba8

Channel Number

48

Encryption

WPA2

BSSID

EE:B1:E0:00:4B:A8

Clients List

Current AP All APs

There are no connected devices

This page displays information about the wireless interfaces of the device

Wi-Fi Status: The basic router Wi-Fi network parameters information in the 5 GHz band; tabs group information by wireless interfaces in the selected band, the tab will become active if the selected wireless interface is enabled; virtual access points can be enabled on the page Wi-Fi - Virtual APs
Clients List: The router wireless clients list
Current AP: Displays only the selected wireless interface clients list
All APs: Displays the clients list of all the wireless interfaces of the selected band

IPv4 Network Settings

Interface Name

br0

DHCP

IP Address

Subnet Mask

IP Pool Range Start Address

IP Pool Range End Address

DHCP Lease Time

Domain Name

Default Gateway

DNS Mode

WAN Interface

Ethernet to Wi-Fi Isolation

Enable Disable

This page is used for configuring the device local area network

DHCP: The DHCP mode, default is the DHCP server
IP Address: The local IP address of the device, it is the default gateway address for connected clients
Subnet Mask: The LAN subnet mask value
IP Pool Range Start Address: The value of the start IP address, starting from which addresses will be allocated to clients; the address must be within the range of the selected network
IP Pool Range End Address: The end IP address that the device can allocate to the client; upon reaching it, the pool is considered exhausted until the already occupied address is released; the address must be within the range of the selected network
DHCP Lease Time: The lease time input field in minutes, after which the client must either release the address or renew the address lease for the same period
Domain Name: The DHCP server domain name input field
Default Gateway: The gateway address where a packet is sent to when the route to the destination net of a packet is unknown
DNS Mode: The DNS mode:

DNS Proxy — clients will be given the IP address of the router as the DNS server address; DNS requests will be cached and redirected in accordance with the WAN settings

Set manually — clients will be given the addresses specified in the DNS1, DNS2, DNS3 fields as the DNS server addresses
Ethernet to Wi-Fi Isolation: When this setting is enabled, wired clients will be isolated from wireless ones

This page is used for configuring the IPv6 settings in the local network

IPv6 Configuration: The local network IPv6 function state
Link-local IPv6 address: Link-local device IPv6 address
IPv6 DNS Mode: DNS mode:

DNS Proxy — clients will be given the router link-local address as the DNS server address; DNS requests will be cached and redirected in accordance with the WAN settings

WAN Connection — clients will be given the addresses of the DNS servers received on WAN

Set manually — clients will be given the addresses specified in the DNS1, DNS2, DNS3 fields as DNS server addresses
Prefix Mode: The local network prefix setting mode:

WAN Delegated — the prefix will be set according to the settings received via DHCPv6 on WAN

Set manually — the manual prefix setting mode via the IPv6 address field
WAN Interface: Selecting the WAN interface for prefix delegation
Router Advertisement Daemon: The router advertisement daemon used for announcing network and autoconfiguration information in an IPv6 network
Maximal Router Advertisement Interval: The maximal interval of sending router advertisements
Minimal Router Advertisement Interval: The minimal interval of sending router advertisements
Managed Address Configuration Flag: The managed configuration flag (M), when enabled, the IP address will be received by a client over DHCPv6 (only in the Stateful mode)
Other Configuration Flag: The other configuration flag (O), when enabled, the DNS and other settings will be received by a client over DHCPv6 (only in the Stateful mode)
On Link Flag: The L flag in the RADVD configuration indicating that the announced network is accessible within the broadcast domain
Autonomous Flag: The A flag in the RADVD configuration allowing a client the Stateless configuration
DHCPv6 Server: Enabling the DHCPv6 server function
IP Pool Range Start Address: The minimum interface ID (the last 64 bits of an IPv6 address) sent over IPv6; the first 64 bits are derived from the LAN prefix
IP Pool Range End Address: The maximum interface ID (the last 64 bits of an IPv6 address) sent over IPv6; the first 64 bits are derived from the LAN prefix

Address reservation

Comment

IP Address

MAC Address

DHCP Clients

Name	IP Address	MAC Address	Lease Time, s	Action
DESKTOP-A02RT9K	192.168.1.73	F0:79:59:8E:93:F7	84234

This page is used for statically binding IP addresses and MAC addresses of devices in the local network

Comment: The input field for notes
IP Address: The input field for the IP address to be given to a device in the local network
MAC Address: The input field for the MAC address of a device in the local network

This page is used for configuring STP to prevent broadcast loops on the local bridge of the device

Ageing Time: The lifetime of entries about dynamically learned MAC addresses by the local bridge of the device
802.1d Spanning Tree: Enabling the STP function

LAN Ports Speed Settings

Wired Connection LAN1 (eth0.2)

Wired Connection LAN2 (eth0.3)

Wired Connection LAN3 (eth0.4)

Wired Connection LAN4 (eth0.5)

This page is used for configuring the device LAN ports speed settings

Auto-negotiation: The automatic full duplex/half duplex mode setting with automatic data rate configuring by Ethernet nodes using IEEE 802.3 technology
Auto-negotiation, full: The full duplex mode with automatic data rate configuring by Ethernet nodes using IEEE 802.3 technology
1000M, full: The full duplex mode with data rate up to 1 Gbit/s
100M, full: The full duplex mode with data rate up to 100 Mbit/s
100M, half: The half duplex mode with data rate up to 100 Mbit/s
100M, auto-negotiation: The automatic full duplex/half duplex mode setting with data rate up to 100 Mbit/s
10M, full: The full duplex mode with data rate up to 10 Mbit/s
10M, half: The half duplex mode with data rate up to 10 Mbit/s
10M, auto-negotiation: The automatic full duplex/half duplex mode setting with data rate up to 10 Mbit/s

Access Point Wi-Fi 5 GHz (wlan0)

Loading ...