This page is used for configuring the accounts for access to the web interface

Username

The device username input field

Password

The device password input field

Confirm Password

The device password confirm input field

This page contains the main information about the device

This page allows to update the device firmware to a newer version; do not turn off the device during the update to prevent damage to the device memory

Active Firmware Version

The version of the firmware, installed on the device

Firmware Image

When having a local file with the new firmware, you can update the firmware of the device by specifying the path to this file and clicking the "Start update" button

Update from a Remote Server

Updating firmware from the Eltex server

This page is used for managing the device configuration

Save the Device Configuration to a File

To save the current device configuration to the local PC, click the "Download" button

Load the Device Configuration from a File

Selecting a local configuration file, to update the device configuration, click the "Browse" button, specify the file (in .cfg format) and click the "Upload File" button

Reset to Factory Default Settings

To reset all device settings to factory default click the "Reset" button

This page is used for configuring the time settings and the NTP client

Current Time

The current date and time input field, there is an ability to copy this info from the local PC system time instead of putting in

Time Zone

The time zone where the device is located

Enable Daylight Saving Time

When checked, the transition to daylight saving time is performed automatically

Enable NTP Server Synchronization

When checked, the device is synchronized with the explicit time server

Get NTP Server IP Address via DHCP

When checked, the NTP server obtained from the 42 DHCP option is used

Interface

An interface for synchronizing with the NTP server

This page is used for configuring the Syslog client

System Log

Enabling and disabling the system log function

Log Level

Sets the level according to which events are recorded in the device memory

Display Level

Sets the display level of event messages

Levels List

• Emergency messages notify that system is inoperable;
• Alert messages notify that immediate action required;
• Critical messages notify about errors that cause processes to terminate;
• Error messages notify about troubles that allow the device to continue working, but with a deterioration in certain functionality;
• Warning messages are cautionary;
• Notice messages contain general information (for example, about changing part of the device configuration);
• Informational messages contain system information;
• Debugging messages are generated during debugging and detailed information.

Enable Remote Logging

When checked, logs will be being uploaded to the Syslog server