Note: After you have made your changes, click Save Settings to apply your changes.

Network Setup

Router Address

If are in Bridge mode, you can specify an IP address or automatically obtain an IP

address.

IP Address

The Router's local IP address is displayed.

Subnet Mask

The Router's local subnet mask is displayed.

Default Gateway

Enter the Router's IP address (available only while in Bridge mode).

Router Name

The Router Name is also the Router's NetBIOS name.

DHCP Server Setting

DHCP Server

by default, the Router assigns dynamic IP addresses to local network devices (also called

DHCP clients).

Start IP Address

The Start IP Address specifies the starting IP address for the range of available IP

addresses.

Maximum Number of Users

Enter the maximum number of available IP addresses.

IP Address Range

The range of available IP addresses is displayed.

Client Lease Time

Enter the length of time, in minutes, that a DHCP client will be allowed to use a dynamic IP

address. The default is 0 minutes, which means one day After this time is up, the client Will

be automatically assigned a new dynamic IP address, or the lease will be renewed

Static DNS 1-3

To assign specific DNS server(s) to computers or other devices on your local network, enter

the DNS server IP address(es).

WINS

To assign a WINS server to computers or other devices on your local network, enter ts IP

address.

DHCP Reservation

If want to assign a fixed IP address to a local network device, click DHCP Reservation.

Select Clients from DHCP Tables

Click the Select check box to reserve a client's IP address Then click Add Clients.

Manually Add Client

To manually assign an IP address, enter the client’s name in the Enter Client Name field

Enter the desired IP address in the Assign IP Address field Enter its MAC address in the To

This MAC Address field. Then click Add.

Clients Already Reserved

To remove a client from this list, click Remove.

To apply your changes, click Save Settings to apply your changes. To update the on-screen

Information, click Refresh. To exit this screen and return to the Basic Setup screen, click

Close.

Note: For more information, refer to the online user Guide at www.belkin.com