IPv6 is a new IP protocol that uses simplified packet headers and requires IPSec as a

fundamental interoperability requirement. It also has improved support for mobile IP and

computing devices.

Note: After you have made your changes, click Save Settings to apply your changes.

Internet Setup

Select Enabled to automatically use IPv6 for all network addressing.

IPv6 -Automatic

Select Enabled to automatically use IPv6 for all network addressing.

DUID

This is the IPv6 DUID (DHCP for IPv6 Unique Identifier) value that the router automatically

generates.

Network Setup

6rd Tunnel

To use 6rd Tunnel, IPv6 —Automatic must be disabled. A 6rd Tunnel allows router to

send IPv6 IP addresses over IPv4 networks. Select Automatic Configuration for your router

to handle these settings (such as prefixes and address masks) automatically. Select Manual

Configuration to change these settings manually.

Prefix

Enter the prefix address used for the tunnel provided by your ISP.

Prefix Length

Enter the prefix length used for the tunnel provided by your ISP.

Border Relay

Enter the border relay address used for the tunnel provided by your ISP.

IPv4 Address Mask

Enter the IPv4 address mask length used for the tunnel provided by your ISP.

Note: For more information, refer to the online User Guide at www.belkin.com