Product Page: DGL-5500A1 Hardware Version: A1   Firmware Version: 1.10  
D-Link
My NetworkStatisticsSetupAdvancedMaintenanceStatus

System Settings

The System Settings section allows you to restart the device, or restore the router to the factory default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you have created.

The current system settings can be saved as a file onto the local hard drive.

Firmware Information

Current Firmware Version : 1.10 Date :
Check Online Now for Latest Firmware Version:

Firmware Upgrade

Note: Some firmware upgrades reset the configuration options to the factory defaults. Before performing an upgrade, be sure to save the current configuration from the Maintenance->System screen.

To upgrade the firmware, your PC must have a wired connection to the router. Enter the name of the firmware upgrade file, and click on the Upload button.


Restore To Factory Default Settings

Restore all Settings to the Factory Defaults:  

Restart The Device

Restart The Device:  

Save Configuration

Save Settings To Local Hard Drive:  

Upload Configuration

Load Settings From Local Hard Drive:  
 


Progress:

Message

Created with Raphaël 2.1.0 My Network Statistics Setup Advanced Maintenance Status