| Profile Active: |
No
Yes |
| Primary SIP Server: |
(e.g., sip.mycompany.com, or IP address) |
Failover SIP Server: |
(Optional, used when primary server no response) |
| Prefer Primary SIP Server: |
No
Yes
( yes - will register to Primary Server if Failover registration expires)
|
| Outbound Proxy: |
(e.g., proxy.myprovider.com, or IP address, if any) |
| SIP transport: |
UDP
TCP
TLS (default is UDP) |
| NAT Traversal (STUN): |
No
No, but send keep-alive
Yes
|
| |
| DNS Mode: |
A Record
SRV
NAPTR/SRV |
| User ID is phone number: |
No
Yes |
| SIP Registration: |
No
Yes |
| Unregister On Reboot: |
No
Yes |
| Outgoing Call without Registration: |
No
Yes |
| Register Expiration: |
(in minutes. default 1 hour, max 45 days) |
| SIP Registration Failure Retry Wait Time: |
(in seconds. Between 1-3600, default is 20) |
| local SIP port: |
(default is 5060 for UDP and TCP; 5061 for TLS) |
| local RTP port: |
(1024-65535, default 5004) |
| Use random port: |
No
Yes |
| Refer-To Use Target Contact: |
No
Yes |
| Transfer on Conference Hangup: |
No
Yes |
| Remove OBP from Route Header: |
No
Yes |
| Support SIP Instance ID: |
No
Yes |
| Validate Incoming SIP Message: |
No
Yes |
| Check SIP User ID for incoming INVITE: |
No
Yes (no direct IP calling if Yes) |
Allow Incoming SIP Messages
from SIP Proxy Only: |
No
Yes (no direct IP calling if Yes) |
| SIP T1 Timeout: |
|
| SIP T2 Interval: |
|
| DTMF Payload Type: |
|
Preferred DTMF method:
(in listed order) |
Priority 1:
Priority 2:
Priority 3:
|
| Send Hook Flash Event: |
No
Yes (Hook-Flash will be sent as a DTMF event if set to Yes)
|
| Enable Call Features: |
No
Yes (if Yes, call features using star codes will be supported locally) |
| Proxy-Require: |
|
| Use NAT IP: |
(used in SIP/SDP message if specified) |
| Distinctive Ring Tone: |
used if incoming caller ID is
used if incoming caller ID is
used if incoming caller ID is
|
| Disable Call-Waiting: |
No
Yes |
| Disable Call-Waiting Caller ID: |
No
Yes |
| Disable Call-Waiting Tone: |
No
Yes |
| Disable Reminder Ring for On-Hold Call: |
No
Yes |
| Disable Visual MWI: |
No
Yes |
| Ring Timeout: |
(10-300, default is 60 seconds) |
| Hunting Group Ring Timeout: |
(5-300, default is 20 seconds) |
| Delayed Call Forward Wait Time: |
(Allowed range 1-120, in seconds.) |
| No Key Entry Timeout: |
(in seconds, default is 4 seconds) |
| Early Dial: |
No
Yes (use "Yes" only if proxy supports 484 response)
|
| Dial Plan Prefix: |
(this prefix string is added to each dialed number) |
| Use # as Dial Key: |
No
Yes (if set to Yes, "#" will function as the "(Re-)Dial" key) |
| Dial Plan: |
|
| SUBSCRIBE for MWI: |
No, do not send SUBSCRIBE for Message Waiting Indication
Yes, send periodical SUBSCRIBE for Message Waiting Indication
|
| Send Anonymous: |
No
Yes (caller ID will be blocked if set to Yes) |
| Anonymous Call Rejection: |
No
Yes |
| Special Feature: |
|
| Session Expiration: |
(in seconds. default 180 seconds) |
| Min-SE: |
(in seconds. default and minimum 90 seconds) |
| Caller Request Timer: |
No
Yes (Request for timer when making outbound calls) |
| Callee Request Timer: |
No
Yes (When caller supports timer but did not request one) |
| Force Timer: |
No
Yes (Use timer even when remote party does not support) |
| UAC Specify Refresher: |
UAC
UAS
Omit (Recommended) |
| UAS Specify Refresher: |
UAC
UAS (When UAC did not specify refresher tag) |
| Force INVITE: |
No
Yes (Always refresh with INVITE instead of UPDATE) |
| Send Re-INVITE After Fax: |
No
Yes |
| |
| Use First Matching Vocoder in 200OK SDP: |
No
Yes |
Preferred Vocoder:
(in listed order) |
choice 1:
choice 2:
choice 3:
choice 4:
choice 5:
choice 6:
choice 7:
choice 8:
|
| G723 rate: |
6.3kbps encoding rate
5.3kbps encoding rate |
| iLBC frame size: |
20ms
30ms |
| iLBC payload type: |
(between 96 and 127, default is 97) |
| AAL2-G726-16 payload type: |
(between 96 and 127, default is 100) |
| AAL2-G726-24 payload type: |
(between 96 and 127, default is 99) |
| AAL2-G726-32 payload type: |
(between 96 and 127, default is 104) |
| AAL2-G726-40 payload type: |
(between 96 and 127, default is 103) |
| G729E payload type: |
(between 96 and 127, default is 102) |
| VAD: |
No
Yes |
| Symmetric RTP: |
No
Yes |
| Fax mode: |
T.38 (Auto Detect)
Pass-Through
|
| Fax tone detection mode: |
Caller
Callee
Caller or Callee |
| Jitter buffer type: |
Fixed
Adaptive |
| Jitter buffer length: |
Low
Medium
High |
| SRTP Mode: |
Disabled
Enabled but not forced
Enabled and forced |
| |
| SLIC Setting: |
|
| Caller ID Scheme: |
|
| Polarity Reversal: |
No
Yes (reverse polarity upon call establishment and termination)
|
| Loop Current Disconnect: |
No
Yes (loop current disconnect upon call termination)
|
| Loop Current Disconnect Duration: |
(In 100 - 10000 milliseconds range, default is 200)
|
| Hook Flash Timing: |
In 40-2000 milliseconds range, minimum:
maximum:
|
| On Hook Timing: |
(In 40-2000 milliseconds range, default is 400)
|
| Gain: |
TX
RX
|
| Disable Line Echo Canceller (LEC): |
No
Yes |
| |
| Ring Tones |
(Syntax: c=on1/off1-on2/off2-on3/off3; [...]) |
| Ring Tone 1: |
|
| Ring Tone 2: |
|
| Ring Tone 3: |
|
| Ring Tone 4: |
|
| Ring Tone 5: |
|
| Ring Tone 6: |
|
| Ring Tone 7: |
|
| Ring Tone 8: |
|
| Ring Tone 9: |
|
| Ring Tone 10: |
|
|
|