| End User Password: |
(purposely not displayed for security protection) |
| Web Port: |
(default for HTTP is 80) |
| Telnet Server: |
No Yes |
| IP Address: |
|
| Time Zone: |
|
| Self-Defined Time Zone: |
(For example: "MTZ+6MDT+5,M4.1.0,M11.1.0") |
| Language: |
|
|
|
| |
| NAT/DHCP Server
Information & Configuration: |
| Device Mode: |
NAT Router
Bridge |
| NAT maximum ports: |
(range: 0 - 4096, default is 1024) |
| NAT TCP timeout: |
(range: 0 - 3600, default is 3600) |
| NAT UDP timeout: |
(range: 0 - 3600, default is 300) |
| Uplink bandwidth: |
|
| Downlink bandwidth: |
|
| Enable UPnP support: |
No
Yes |
| Reply to ICMP on WAN port: |
No
Yes (Unit will not respond to PING from WAN side if set to No) |
| WAN side HTTP/Telnet access: |
No
Yes (WAN side access will be rejected
if set to No) |
| Cloned WAN MAC Addr: |
(in hex format) |
| Enable LAN DHCP: |
No
Yes |
| LAN DHCP Base IP: |
(base IP for the LAN port, default is 192.168.2.1) |
| LAN DHCP Start IP: |
(default is 100) |
| LAN DHCP End IP: |
(default is 199) |
| LAN Subnet Mask: |
(default is 255.255.255.0) |
| DHCP IP Lease Time: |
(in units of hours, default is 120 hours or 5 days) |
| DMZ IP: |
|
| Port Forwarding: |
WAN port
LAN IP
LAN port
Protocol
WAN port
LAN IP
LAN port
Protocol
WAN port
LAN IP
LAN port
Protocol
WAN port
LAN IP
LAN port
Protocol
WAN port
LAN IP
LAN port
Protocol
WAN port
LAN IP
LAN port
Protocol
WAN port
LAN IP
LAN port
Protocol
WAN port
LAN IP
LAN port
Protocol
|
|
|
|