| Account Active: |
No
Yes
|
| Account Name: |
|
| SIP Server: |
|
| Secondary SIP Server: |
|
| Outbound Proxy: |
|
| SIP User ID: |
|
|
Authenticate ID:
|
|
| Authenticate Password: |
|
| Name: |
|
| |
|
| DNS Mode: |
A Record
SRV
NAPTR/SRV
Use Configured IP
|
|
Primary IP:
|
|
|
Backup IP 1:
|
|
|
Backup IP 2:
|
|
| TEL URI: |
Disabled
User=Phone
Enabled
|
| SIP Registration: |
No
Yes
|
| Unregister On Reboot: |
No
Yes
|
| Register Expiration: |
(in minutes. default 1 hour, max 45 days)
|
| local SIP port: |
(default 5060)
|
| SIP Registration Failure Retry Wait Time: |
(in seconds. Between 1-3600, default is 20)
|
| SIP T1 Timeout: |
|
| SIP T2 Interval: |
|
| SIP Transport: |
UDP
TCP
TLS/TCP
|
| Check Domain Certificates: |
No
Yes
|
| Remove OBP from Route: |
No
Yes
|
| Validate Incoming Messages: |
No
Yes
|
| Support SIP Instance ID: |
No
Yes
|
| NAT Traversal: |
|
| SUBSCRIBE for MWI: |
No
Yes
|
| PUBLISH for Presence: |
No
Yes
|
| Proxy-Require: |
|
| Voice Mail UserID: |
(UserID for voice mail system)
|
| Send DTMF: |
in-audio
via RTP (RFC2833)
via SIP INFO
|
| DTMF Payload Type: |
|
| Early Dial: |
No
Yes (use "Yes" only if proxy supports 484 response)
|
| Dial Plan Prefix: |
(this prefix string is added to each dialed number)
|
| Dial Plan: |
|
| BLF Call-pickup Prefix: |
(this prefix is prepended when answering call with BLF key)
|
| Delayed Call Forward Wait Time: |
(Allowed range 1-120, in seconds.)
|
| Enable Call Features: |
No
Yes (if yes, call features using star codes will be supported locally)
|
| Call Log: |
Log All Calls
Log Incoming/Outgoing only (Missed calls NOT recorded)
Disable Call Log
|
| Session Expiration: |
(in seconds. default 180 seconds)
|
| Min-SE |
(in seconds. default and minimum 90 seconds)
|
| Caller Request Timer: |
No
Yes (Request for timer when making outbound calls)
|
| Callee Request Timer: |
No
Yes (When caller supports timer but did not request one)
|
| Force Timer: |
No
Yes (Use timer even when remote party does not support)
|
| UAC Specify Refresher: |
UAC
UAS
Omit (Recommended)
|
| UAS Specify Refresher: |
UAC
UAS (When UAC did not specify refresher tag)
|
| Force INVITE: |
No
Yes (Always refresh with INVITE instead of UPDATE)
|
| Enable 100rel: |
No
Yes
|
| Account Ring Tone: |
system ring tone
custom ring tone 1
custom ring tone 2
custom ring tone 3
|
| Ring Timeout: |
(in seconds. Between 30-3600, default is 60)
|
| Line-seize Timeout: |
(in seconds. Between 15-60, default is 15)
|
| Send Anonymous: |
No
Yes (caller ID will be blocked if set to Yes)
|
| Anonymous Call Rejection: |
No
Yes
|
| Auto Answer: |
No
Yes
|
| Allow Auto Answer by Call-Info: |
No
Yes
|
| Refer-To Use Target Contact: |
No
Yes
|
| Transfer on Conference Hangup: |
No
Yes
|
| Preferred Vocoder:
(in listed order) |
choice 1:
choice 2:
choice 3:
choice 4:
choice 5:
choice 6:
choice 7:
|
| SRTP Mode: |
Disabled
Enabled but not forced
Enabled and forced
Optional
|
| Symmetric RTP: |
No
Yes
|
| Silence Suppression: |
No
Yes
|
| Voice Frames per TX: |
|
| No Key Entry Timeout: |
|
| Use # as Dial Key: |
No
Yes
|
| G723 rate: |
6.3kbps encoding rate
5.3kbps encoding rate
|
| iLBC frame size: |
20ms
30ms
|
| iLBC payload type: |
|
| eventlist BLF URI: |
|
| Special Feature: |
|
| |
|
| |
|
