Currently establishing a connection to the Internet via GSM / UMTS. You can change this setting under theGSM / UMTS menu command.
Select whether your Internet connection should be established via DSL or LAN.
Select this kind of connection if FRITZ!Box is to connect directly using your DSL line.
Select this kind of connection if FRITZ!Box is to be connected to an already existing network (LAN), a cable modem or a DSL router.
All connected network devices share one connection to the Internet
Each connected computer establishes its own Internet connection using its own access software
Specify whether account information such as a 'User name' and 'Password' is required for Internet access.
Specify whether FRITZ!Box is to establish an Internet connection itself or share an existing Internet connection.
Specify whether account information such as a 'User name' and 'Password' is required for Internet access.
Select your Internet Service Provider:
| |||||
| |||||
| |||||
(If one of these services is used, this option must be enabled!)
Clear Internet connection automatically
after seconds
Support for IPTV via T-Home Entertainment
FRITZ!Box works as a DSL modem and does not establish an Internet connection of its own. All connected network devices establish their own Internet connections.
Note: Internet telephony is only possible in the "Use one Internet connection for all computers (router)" operating mode.
When this option is enabled, only PPPoE packets are transmitted over DSL. There is no chance that packets can be transferred from files and printers released for sharing with Internet users.
If this option is disabled, all data packets will be transmitted via DSL. All computers must be located in the same IP network.
DSL ATM Settings
The values for the following ATM settings are supplied by your DSL provider.
Encapsulation
FRITZ!Box MAC address: 00:1A:4F:08:B4:85
Enter here the IP settings to be used in your network.
Careful: After changes to these settings are applied, the FRITZ!Box user interface can be reached only via the configured IP address or the IP address assigned by the DHCP server.
Enter the IP settings here.
Prioritization of the network devices requires data about the speed of your DSL line:
| kBit/s | ||
| kBit/s |
Configure the speed of your DSL line. These values are required to secure the prioritzation of the network devices.
| kBit/s | ||
| kBit/s |
DSL ATM Settings
Please note that manual settings are required only in special cases. Your DSL provider can tell you which values are required.
| Encapsulation | |
FRITZ!Box MAC Address
If your Internet Service Provider expects a special MAC address, enter it here
MAC address:: : : : :