Advanced Wireless

Authentication Type
(Default: Auto)
Basic Rate
(Default: Default)
Transmission Rate
(Default: Auto)
CTS Protection Mode
(Default: Disable)
Frame Burst
(Default: Disable)
Beacon Interval
(Default: 100ms, Range: 1 - 65535)
DTIM Interval
(Default: 1, Range: 1 - 255)
Fragmentation Threshold
(Default: 2346, Range: 256 - 2346)
RTS Threshold
(Default: 2347, Range: 0 - 2347)
Max Associated Clients
(Default: 128, Range: 1 - 256)
AP Isolation
(Default: Off)
TX Antenna
(Default: Auto)
Preamble
(Default: Long)
RX Antenna
(Default: Auto)
Xmit Power
(Default: 28, Range: 0 - 251mW)
Afterburner
(Default: Off)
Wireless GUI Access
(Default: On)
WMM Support
(Default: Off)
No-Acknowledgement
(Default: Off)
EDCA AP Parameters
CWmin  CWmax   AIFSN  TXOP(b)  TXOP(a/g) Admin Forced
AC_BK
AC_BE
AC_VI
AC_VO
EDCA STA Parameters
CWmin  CWmax   AIFSN  TXOP(b)  TXOP(a/g) Admin Forced
AC_BK
AC_BE
AC_VI
AC_VO

Firmware: DD-WRT v23 (12/25/05)
Time: 16:56:43 up 5 min, load average: 0.16, 0.04, 0.01
WAN IP: 192.168.178.22
Authentication Type:
You may choose from Auto or Shared Key. Shared key authentication is more secure, but all devices on your network must also support Shared Key authentication.

More...