Internet Setup

Internet Connection Type
STP
EnableDisable (disable for COMCAST ISP)

Optional Settings (required by some ISPs)
Router Name
Host Name
Domain Name
MTU
Size

Network Setup

Router IP
Local IP Address
...
Subnet Mask
...
Gateway
...
Local DNS
...

Network Address Server Settings (DHCP)
DHCP Type
DHCP Server
Enable Disable
Starting IP Address
192.168.1.
Maximum DHCP Users
Client Lease Time
minutes
Static DNS 1
...
Static DNS 2
...
Static DNS 3
...
WINS
...
Use DNSMasq for DHCP

Time Setting
 
Automatically adjust clock for daylight saving changes

Firmware: DD-WRT v23 (12/25/05)
Time: 16:56:37 up 5 min, load average: 0.00, 0.01, 0.00
WAN IP: 192.168.178.22
Automatic Configuration - DHCP:
This setting is most commonly used by Cable operators.
Host Name:
Enter the host name provided by your ISP.
Domain Name:
Enter the domain name provided by your ISP.
Local IP Address:
This is the address of the router.
Subnet Mask:
This is the subnet mask of the router.
DHCP Server:
Allows the router to manage your IP addresses.
Starting IP Address:
The address you would like to start with.
Maximum number of DHCP Users:
You may limit the number of addresses your router hands out.
Time Setting:
Choose the time zone you are in. The router can also adjust automatically for daylight savings time.

More...