MF283

Limited Service

⁰ 100%

Logout

Router Settings

IP Address *

Subnet Mask *

MAC Address *

DHCP Server *

DHCP IP Pool *

DHCP Lease Time *

hour(s)

IP Address: LAN IP address of the router. You can access page management on device via this IP address.
Subnet Mask: Subnet mask for IP address.
DHCP Server Enable: If the Dynamic Host Configuration Protocol (DHCP) service is enabled, the device allocates IP addresses to clients connected to it.
DHCP Server Disable: If the Dynamic Host Configuration Protocol (DHCP) service is disabled, the device does not allocate IP addresses to clients connected to it and IP addresses must be entered manually from each client.
DHCP IP Pool: Starting and Ending IP address specify IP address range which is assigned by DHCP server to access devices. The IP address out of this range cannot be assigned by DHCP server.
DHCP Lease Time: Lease Time specifies how long a computer can use IP address. If the device will continue to use IP address, it must initiate request again before lease time expires. This IP address will not assign to other device until the old device initiates no request when its lease time expires.

Network Address	Subnet Mask	Gateway	Interface
192.168.0.0	255.255.255.0	0.0.0.0	LAN
239.0.0.0	255.0.0.0	0.0.0.0	LAN

Routing Table: This page provides the function of routing parameter(s) configuration.

Guest Wi-Fi Isolation *

Guest Wi-Fi Isolation: On or off Guest Wi-Fi isolation. If this function is enable, then all the user access by Guest SSID can't communication with Main SSID user and access WebUI. The Guest SSID Gateway address must not same as Main's.
IP Address: LAN IP address of the router. You can access page management on device via this IP address.
Subnet Mask: Subnet mask for IP address.
DHCP Server Enable: If the Dynamic Host Configuration Protocol (DHCP) service is enabled, the device allocates IP addresses to clients connected to it.
DHCP Server Disable: If the Dynamic Host Configuration Protocol (DHCP) service is disabled, the device does not allocate IP addresses to clients connected to it and IP addresses must be entered manually from each client.
DHCP IP Pool: Starting and Ending IP address specify IP address range which is assigned by DHCP server to access devices. The IP address out of this range cannot be assigned by DHCP server.
DHCP Lease Time: Lease Time specifies how long a computer can use IP address. If the device will continue to use IP address, it must initiate request again before lease time expires. This IP address will not assign to other device until the old device initiates no request when its lease time expires.