| Operation Mode | System Configuration | Tools | Device Status | Logout |

Ping Watchdog
 
Ping Watchdog
   
The Ping Watchdog will ping up to a IP addresses for connection status. If the remote IP addresses do not respond to Ping, the device will either reconnect or power reboot.

Ping Watchdog: Enable Disable
  IP Address: . . .
  IP Address 2: . . . (Optional)
  Ping Frequency:  Seconds (10 to 999, default is: 120)
  Failed tries: (default is 2 tries)
  Action
     
NOTE:Watchdog will take effect 10 minutes after startup. when filled, IP Address 1 must fail to
respond for watchdog to take action.