WAN Interface Setup

This page is used to configure the parameters for Internet network which connects to the WAN port of your Access Point. Here you may change the access method to static IP, DHCP, PPPoE, PPTP, USB3G or L2TP by click the item value of WAN Access type.
WAN Interface Setup
WAN Access Type:
PPPOE Connecting No:
MTU  (1400-1500)
MTU Size:  (1400-1492)
The First pppoe info:
     
 (1-1000 minutes)
MTU  (1360-1492)
The second pppoe info:
User Name:
Password:
Service Name(AC):
Connection Type:      
Idle Time:  (1-1000 minutes)
MTU Size:  (1360-1492 bytes)
Sub Net:  (eg:192.168.1.0/25)
The Third pppoe info:
User Name:
Password:
Service Name(AC):
Connection Type:      
Idle Time:  (1-1000 minutes)
MTU Size:  (1360-1492 bytes)
Sub Net:  (eg:192.168.1.0/25)
The Fourth pppoe info:
User Name:
Password:
Service Name(AC):
Connection Type:      
Idle Time:  (1-1000 minutes)
MTU Size:  (1360-1492 bytes)
Sub Net:  (eg:192.168.1.0/25)
Server IP Address:
     
MTU  (1400-1460 )
  
Server IP Address:
Connection Type:      
Idle Time:  (1-1000 minutes)
MTU Size:  (1400-1460 bytes)
User Name:
Password:
PIN:
APN:
Dial Number:
Connection Type:      
Idle Time:  (1-1000 minutes)
MTU Size:  (1420-1490 bytes)
DNS 1:
DNS 2:
DNS 3: