|
|
|
Username: The username for the DSL access.
Password: The password for the DSL access.
Authentification: Specifies the authentification protocol required to establish connection.
On-Demand: Enable on-demand mode. The connection will disconnect if no
activity is detected after the specified idle timeout value.
Idle Timeout: Specifies that DSL should disconnect if the link has no
activity detected for n seconds. A non-zero value.
Keep Alive: When on-demand option is not enable, this value specifies the
time to wait without being connected to your provider before terminating the
connection. A non-zero value.
Set Defaultroute: Specify connection as the default-route.
MRU: Maximum Receive Unit the DSL connection can receive. It is an negotiated
value that ask the provider to send packets of no more than n bytes. The
minimum MRU value is 128.
Enforce MRU:
Check this box if you experience problems accessing the Internet over a PPPoE connection.
This feature will force all TCP traffic to conform with PPP MRU by changing TCP Maximum Segment Size to PPP MRU.
Debug: Enables PPP connection debugging facilities.
Connect: Use the current settings to establish a ppp connection. In "On Demand" mode "Connect" takes no action in establishing connection.
Disconnect: Disconnects the ppp connection. |
|
|
