You can use this page to do the WDS settings. For normal operation, these are not required.
Enable Wireless Repeating
Enable the checkbox if you want to use WDS (Wireless Distribution System) feature.
Select the desired WDS mode for your environment.
Wireless Point-to-Point Bridge
In this mode, the DG834Gv5 will communicate ONLY with another
Bridge-mode Wireless Station, and wireless client association is
disabled. You must enter the MAC address (physical address) of the other
Bridge-mode Wireless Station in the field provided. WEP can (and
should) be used to protect this communication.
Wireless Point-to-Multi-Point Bridge
Select this only if this DG834Gv5 is the "Master" for a group of
Bridge-mode Wireless Stations. The other Bridge-mode Wireless Stations
must be set to Point-to-Point Bridge mode, using this DG834Gv5's MAC
address. Wireless client association is disabled. They then send all
traffic to this "Master", rather than communicating directly with each
other. WEP can (and should) be used to protect this traffic.
Repeater with Wireless Client Association
If selected, this AP will operate as a Repeater only, and send all
traffic to the remote AP. Wireless client association is enabled. If
selected, you must enter the MAC address (physical address) of the
remote AP.