Router Upgrade Help

You install new versions of the router's software using the Router Upgrade page.

Click the check button to go to the NETGEAR web site to get new versions of the router software. After downloading the file, you'll need to unzip (or unstuff) it before upgrading the router.

Select the check box if you want to check for new version upon log-in. For the most current documentation, go to http://kbserver.netgear.com/products/WPNT834.asp

IMPORTANT! Once you click Upload do NOT interrupt the process of sending the software to the router and restarting the router. If you think the process may be interrupted in some way, click Cancel to keep the current Router software.

To upgrade Router software:

1. Go to www.NETGEAR.com and download the updated software.
2. If not done automatically, uncompress the file.
   You may want to read the Release Notes before continuing.
3. Click Browse.
4. Locate and select the file you just downloaded and uncompressed.
5. Click Upload to send the software to the router.
   This loads the new software in the router and causes the router to restart.
   Note: Do not try to go online, turn off the router, shutdown the computer or do anything else to the router until the router finishes restarting! When the Ready light stops blinking, wait a few more seconds before doing anything.
6. Click Router Status and check the Firmware Version to verify that your Router now has the new software installed.

IMPORTANT! In some cases, such as a major upgrades, you may need to reconfigure your Router after upgrading it. Refer to the Release Notes included with the software to find out if you need to reconfigure the router.

If you are unable to successfully upgrade using this method, refer to the Reference Manual on the Router Resource CD for other ways to upgrade the router.