Wireless / Advanced

This page allows you to configure advanced features of the wireless LAN interface. You can select a particular channel on which to operate, force the transmission rate to a particular speed, set the fragmentation threshold, set the RTS threshold, set the wakeup interval for clients in power-save mode, set the beacon interval for the access point, set XPress mode and set whether short or long preambles are used.
Click "Apply/Save" to configure the advanced wireless options.

Band:

Channel:
Current Channel:

Auto Channel Timer(min)

Auto Channel Set:

Allowed Channels:

Allowed Channels:

802.11n/EWC:

Bandwidth:
Current Bandwidth:

Control Sideband:
Current Control Sideband:

802.11n Rate:

802.11n Protection:

Support 802.11n Client Only:

RIFS Advertisement:

OBSS Coexistence:

RX Chain Power Save: Power Save status:

RX Chain Power Save Quiet Time:

RX Chain Power Save PPS:

54g™ Rate:

Multicast Rate:

Basic Rate:

Fragmentation Threshold:

RTS Threshold:

DTIM Interval:

Beacon Interval:

Global Max Clients:

XPress™ Technology:

54g™ Mode:

54g™ Protection:

Regulatory Mode:

Pre-Network Radar Check:

In-Network Radar Check:

TPC Mitigation(db):

Afterburner Technology: (Disable WMM for Selection)

Preamble Type:

Transmit Power:

Transmit Power Boost:

WMM(Wi-Fi Multimedia):

WMM No Acknowledgement:

WMM APSD:

Iperf Support:

Video Error Correction:

Wireless Mode:

URE:

URE Mode:

STA Retry Time(sec):

Beamforming Transmission (BFR):

Beamforming Reception (BFE):

Band Steering:

BSD Role Config: IP Addr Port Number

Helper Addr & Port:

Primary Addr & Port

Enable Traffic Scheduler:

Airtime Fairness:

Stalled Link Detection Treshold:

Packet Saving Retry Limit:

ACS Mode:

DFS Channel Selection:

CI Scan Interval:

CI Scan Timeout:

Scan Result Expiry:

Tx IDLE Frame Rate:

Chan Dwell Time:

Chan FLOP Period:

Sample Period:

Sample Count:

Non-TCP Stream TxFail Threshold:

TCP Stream TxFail Threshold:

DFS Reentry Window Settings: Seconds Threshold

Immediate Reentry:

Deferred Reentry:

Channel Active:

Bandwidth:		Current Bandwidth:
Control Sideband:		Current Control Sideband:
802.11n Rate:
802.11n Protection:
Support 802.11n Client Only:
RIFS Advertisement:
OBSS Coexistence:
RX Chain Power Save:		Power Save status:
RX Chain Power Save Quiet Time:
RX Chain Power Save PPS:

54g™ Rate:
Multicast Rate:
Basic Rate:
Fragmentation Threshold:
RTS Threshold:
DTIM Interval:
Beacon Interval:
Global Max Clients:
XPress™ Technology:

Regulatory Mode:
Pre-Network Radar Check:
In-Network Radar Check:
TPC Mitigation(db):

Band Steering:
BSD Role Config:	IP Addr	Port Number
Helper Addr & Port:
Primary Addr & Port

ACS Mode:
DFS Channel Selection:
CI Scan Interval:
CI Scan Timeout:
Scan Result Expiry:
Tx IDLE Frame Rate:
Chan Dwell Time:
Chan FLOP Period:
Sample Period:
Sample Count:
Non-TCP Stream TxFail Threshold:
TCP Stream TxFail Threshold:
DFS Reentry Window Settings:	Seconds	Threshold
Immediate Reentry:
Deferred Reentry:
Channel Active: