Grandstream Device Configuration STATUS BASIC SETTINGS ADVANCED SETTINGS FXS PORT1 FXS PORT2 End User Password:   (purposely not displayed for security protection) Web Port:   (default for HTTP is 80) Telnet Server:   No      Yes IP Address: dynamically assigned via DHCP   DHCP hostname: (optional)   DHCP domain: (optional)   DHCP vendor class ID: (optional) use PPPoE   PPPoE account ID:   PPPoE password:   PPPoE Service Name:   Preferred DNS server:   . . . statically configured as:   IP Address: . . .   Subnet Mask: . . .   Default Router: . . .   DNS Server 1: . . .   DNS Server 2: . . . Time Zone:   GMT-12:00 (International Date Line West) GMT-11:00 (Midway Island, Samoa) GMT-10:00 (US Hawaiian Time) GMT-9:00 (US Alaska Time) GMT-8:00 (US Pacific Time, Los Angeles) GMT-7:00 (US Mountain Time, Denver) GMT-6:00 (US Central Time, Chicago) GMT-5:00 (US Eastern Time, New York) GMT-4:30 (Caracas) GMT-4:00 (Atlantic Time, Quebec) GMT-3:30 (Newfoundland) GMT-3:00 (Greenland) GMT-2:00 (Mid-Atlantic) GMT-1:00 (Azores, Cape Verdi Is.) GMT (London, Dublin, Edinburgh, Lisbon, Casablanca, Monrovia) GMT+1:00 (Paris, Amsterdam, Berlin, Rome, Vienna, Madrid, Warsaw, Brussels) GMT+2:00 (Israel, Cairo, Athens, Helsinki, Istanbul, Buchrest) GMT+3:00 (Moscow, Kuwait, Baghdad, Tehran, Nairobi) GMT+4:00 (Abu Dhabi, Baku) GMT+5:00 (Islamabad, Ekaterinburg, Karachi, Tashkent) GMT+5:30 (Chennai, New Delhi, Mumbai) GMT+5:45 (Kathmandu) GMT+6:00 (Almaty, Astana, Dhaka, Novosibirsk) GMT+6:30 (Rangoon) GMT+7:00 (Bankok, Jakarta, Hanoi, Krasnoyarsk) GMT+8:00 (Beijing, Singapore, Taipei, Kuala Lumpur, Irkutsk, Perth) GMT+9:00 (Japan, Korea, Yakutsk) GMT+9:30 (Adelaide, Darwin) GMT+10:00 (Brisbane, Sydney, Melbourne, Canberra, Guam, Hobart) GMT+11:00 (Magadan, Solomon Is., New Caledonia) GMT+12:00 (Auckland, Wellington, Fiji) GMT+13:00 (Nuku'alofa) Using self-defined Time Zone Self-Defined Time Zone:   (For example: MTZ+6MDT+5,M4.1.0,M11.1.0) Language:   English Chinese Spanish IVR   NAT/DHCP Server Information & Configuration: Device Mode:   NAT Router      Bridge NAT maximum ports:   (range: 0 - 4096, default is 1024) NAT TCP timeout:   (range: 0 - 3600, default is 3600) NAT UDP timeout:   (range: 0 - 3600, default is 300) Uplink bandwidth:   Disabled 128k 256k 512k 1M 2M 3M 4M 5M 10M 15M Downlink bandwidth:   Disabled 128k 256k 512k 1M 2M 3M 4M 5M 10M 15M Enable UPnP support:   No      Yes Reply to ICMP on WAN port:   No      Yes   (Unit will not respond to PING from WAN side if set to No) WAN side HTTP/Telnet access:   No      Yes   (WAN side access will be rejected if set to No) Cloned WAN MAC Addr:             (in hex format) Enable LAN DHCP:   No      Yes LAN DHCP Base IP:   (base IP for the LAN port, default is 192.168.2.1) LAN DHCP Start IP:   (default is 100) LAN DHCP End IP:   (default is 199) LAN Subnet Mask:   (default is 255.255.255.0) DHCP IP Lease Time:   (in units of hours, default is 120 hours or 5 days) DMZ IP:   Port Forwarding:   WAN port   LAN IP   LAN port   Protocol UDP Only TCP Only TCP/UDP   WAN port   LAN IP   LAN port   Protocol UDP Only TCP Only TCP/UDP   WAN port   LAN IP   LAN port   Protocol UDP Only TCP Only TCP/UDP   WAN port   LAN IP   LAN port   Protocol UDP Only TCP Only TCP/UDP   WAN port   LAN IP   LAN port   Protocol UDP Only TCP Only TCP/UDP   WAN port   LAN IP   LAN port   Protocol UDP Only TCP Only TCP/UDP   WAN port   LAN IP   LAN port   Protocol UDP Only TCP Only TCP/UDP   WAN port   LAN IP   LAN port   Protocol UDP Only TCP Only TCP/UDP       All Rights Reserved Grandstream Networks, Inc. 2006-2008