Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS 1 ADVANCED SETTINGS 2
End User Password:   (purposely not displayed for security protection)
Web Port:   (default for HTTP is 80)
IP Address:
dynamically assigned via DHCP (default) or PPPoE:
(will attempt PPPoE if DHCP fails and following is non-blank)
  DHCP hostname:
  DHCP domain:
  DHCP vendor class ID:
  PPPoE account ID:
  PPPoE password:
  PPPoE Service Name:
  Preferred DNS server: . . .
statically configured as:
       IP Address:   . . .
       Subnet Mask:   . . .
       Default Router:   . . .
       DNS Server 1:   . . .
       DNS Server 2:   . . .
Time Zone:  
Daylight Savings Time:   No      Yes  Optional Rule:
PSTN Access Code:   (key pattern to use the PSTN line, default is "*00")
 
NAT/Bridge/DHCP Server Information & Configuration:
Device Mode:   NAT Router      Bridge
WAN Side HTTP Access:   No      Yes   (WAN side access to http server will be rejected if set to No)
Reply to ICMP
on WAN port: 		  No      Yes   (Unit will not respond to PING from WAN side if set to No)
Cloned WAN MAC Addr:             (in hex format)
LAN Subnet Mask:   (default is 255.255.255.0)
LAN DHCP Base IP:   (base IP for the LAN port, default is 192.168.2.1)
DHCP IP Lease Time:   (in units of hours, default is 120 hours or 5 days)
DMZ IP:  
Port Forwarding:   WAN port   LAN IP   LAN port   Protocol
  WAN port   LAN IP   LAN port   Protocol
  WAN port   LAN IP   LAN port   Protocol
  WAN port   LAN IP   LAN port   Protocol
  WAN port   LAN IP   LAN port   Protocol
  WAN port   LAN IP   LAN port   Protocol
  WAN port   LAN IP   LAN port   Protocol
  WAN port   LAN IP   LAN port   Protocol
     
All Rights Reserved Grandstream Networks, Inc. 2005