| SIP Server: |
(e.g., sip.mycompany.com, or IP address) |
| Outbound Proxy: |
(e.g., proxy.myprovider.com, or IP address, if any) |
| SIP User ID: |
(the user part of an SIP address) |
| Authenticate ID: |
(can be identical to or different from SIP User ID) |
| Authenticate Password: |
(purposely not displayed for security protection)
|
| Name: |
(optional, e.g., John Doe) |
| |
| Use DNS SRV: |
No
Yes |
| User ID is phone number: |
No
Yes |
| SIP Registration: |
No
Yes |
| Unregister On Reboot: |
No
Yes |
| Register Expiration: |
(in minutes. default 1 hour, max 45 days) |
| local SIP port: |
(default 5060) |
| local RTP port: |
(1024-65535, default 5004) |
| Use random port: |
No
Yes |
| SIP Registration Failure Retry Wait Time: |
(in seconds. Between 1-3600, default is 20) |
| DTMF Payload Type: |
|
| Send DTMF: |
in-audio
via RTP (RFC2833)
via SIP INFO |
| Send Flash Event: |
No
Yes (Flash will be sent as a DTMF event if set to Yes)
|
| Enable Call Features: |
No
Yes
(if yes, call features using star codes will be supported locally) |
Use Bell-style
3-way Conference: |
No
Yes (if Yes, *23 will be disabled) |
| Offhook Auto-Dial: |
(User ID/extension to dial automatically when offhook) |
| Proxy-Require: |
|
| Disable Call-Waiting: |
No
Yes |
| Disable Call Waiting Caller ID (CWCID): |
No
Yes (If set Yes, users cannot see Call-Waiting Caller-ID) |
| NAT Traversal (STUN): |
No
Yes |
| No Key Entry Timeout: |
(in seconds, default is 4 seconds) |
| |
Preferred Vocoder:
(in listed order) |
choice 1:
choice 2:
choice 3:
choice 4:
choice 5:
choice 6: |
| Voice Frames per TX: |
(up to 10/20/32/64 for G711/G726/G723/other codecs respectively)
|
| G723 rate: |
6.3kbps encoding rate
5.3kbps encoding rate |
| iLBC frame size: |
20ms
30ms |
| iLBC payload type: |
(between 96 and 127, default is 97) |
| Silence Suppression: |
No
Yes |
| Fax Mode: |
T.38 (Auto Detect)
Pass-Through
|
| Early Dial: |
No
Yes (use "Yes" only if proxy supports 484 response)
|
Allow incoming SIP messages
from SIP proxy only: |
No
Yes |
| Allow outgoing call without Registration: |
No
Yes |
| Dial Plan Prefix: |
(this prefix string is added to each dialed number) |
| Use # as Dial Key: |
No
Yes (if set to Yes, "#" will function as the Dial key) |
| SUBSCRIBE for MWI: |
No, do not send SUBSCRIBE for Message Waiting Indication
Yes, send periodical SUBSCRIBE for Message Waiting Indication
|
| Send Anonymous: |
No
Yes (caller ID will be blocked if set to Yes) |
| Lock keypad update: |
No
Yes (configuration update via keypad is disabled if set
to Yes) |
| Refer-To Uses Target Contact |
No
Yes |
Special Feature: |
|
| Volume Amplification: |
TX
RX
|
|
|