FG-ACE-IAD-4-GW
Wizard
Network
Interfaces
WiFi
Static ARP
DHCP and DNS
Hostnames
IPv6 RA and DHCPv6
Static Route
Policy Route
RIP
Firewall
Diagnostics
VPN
IPSec
QoS
Parent Control
ACL
Port Mirroring
Port Bind
Multi-WAN
Status
Overview
Routes
System Log
WiFi Neighbor
Terminal Equipment
Realtime Graphs
Ethernet Port
3G/LTE Info
System
System
Administration
WPS Button and Led
3G/LTE Dongle Driver
Restore/Upgrade
Reboot
Restore Default
Services
NTP Client
3G SMS
Dynamic DNS
Printer
FTP Server
Network Shares
UPNP
SSH Access
TR069
VoIP
Phone
Phone Status
Codec
Advanced Settings
Logout
Unsaved Changes: 1
Refresh on
Refresh off
DHCP and DNS
Dnsmasq is a combined
DHCP
-Server and
DNS
-Forwarder for
NAT
firewalls
DHCP Server Settings
General Setup
Advanced Settings
Start
Lowest leased address as offset from the network address.
Limit
Maximum number of leased addresses.
Leasetime
Expiry time of leased addresses, minimum is 2 Minutes (
2m
).
Dynamic
DHCP
Dynamically allocate DHCP addresses for clients. If disabled, only clients having static leases will be served.
IPv4
-Netmask
Override the netmask sent to clients. Normally it is calculated from the subnet that is served.
Force
Force DHCP on this network even if another server is detected.
Vendor Class Identifier
Vendor class identifier of dhcp client which will be send option 43,66,67,20.
Vendor Specific Information
Vendor Specific Information which will be send to dhcp client.
TFTP Server Name
TFTP Server Name which will be send to dhcp client.
Bootfile Name
Bootfile Name which will be send to dhcp client.
Non-Local Source Routing
This option specifies whether the client should allow forwarding of datagrams with non-local source routes.
DNS Server Settings
Local domain
Local domain suffix appended to DHCP names and hosts file entries
DNS forwardings
List of
DNS
servers to forward requests to
Active DHCP Leases
Hostname
IPv4-Address
MAC-Address
Leasetime remaining
Collecting data...
Active DHCPv6 Leases
Hostname
IPv6-Address
DUID
Leasetime remaining
Collecting data...
Static Leases
Static leases are used to assign fixed IP addresses and symbolic hostnames to DHCP clients. They are also required for non-dynamic interface configurations where only hosts with a corresponding lease are served.
Use the
Add
Button to add a new lease entry. The
MAC-Address
indentifies the host, the
IPv4-Address
specifies to the fixed address to use and the
Hostname
is assigned as symbolic name to the requesting host.
Hostname
MAC
-Address
IPv4
-Address
This section contains no values yet