Management and Diagnostic Console
System Summary
Broadband Link
• Summary
• Statistics
• Detailed Statistics
• Configure
Local Network
• Status
• Statistics
• Device List
• Wireless
• Configure
• Address Allocation
Firewall
• Settings
• Detailed Information
• Advanced Settings
Troubleshooting
• DSL Diagnostics
• Event Log
• Network Tests
• Upgrade History
• Resets
Advanced
• Syslog Settings
• Provisioning Info
• Configure Time Services
• Configure Services
• Static Routes
• DNS Resolve
• Traffic Shaping
• Link Manager
• Detailed Log
Settings
Advanced – Configure Services
Routing
Enable Routing: (Routing disabled = Bridge mode)
Warning: When you disable routing, the gateway’s local IP address gets set to 192.168.0.1/255.255.255.0.

If you want to connect to the gateway when it is in bridged mode to change its configuration parameters, you must:
  • Configure your computer’s IP address to work on the same subnet (ex. 192.168.0.x, 255.255.255.0).
  • Attach your computer to the local network port of the gateway.
  • Enter 192.168.0.1 as address in a web browser.
Note: When routing is disabled, NAT and the DHCP Server are disabled.
NAT
TCP Timeout:  Minutes
Warning
 (5 – 1440 minutes, default = 1440 minutes)
UDP Timeout:  Minutes
Warning
 (1 – 720 minutes, default = 10 minutes)
IGMP Querier:
Broadband Status Notification
Enable:
Missing DSL Filter Detection
Enable:
SIP Application Layer Gateway
Enable:
Upstream MTU
Force Upstream MTU:
Settings
Back to Top