Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS EXT 1 EXT 2
ACCOUNT 1 ACCOUNT 2 ACCOUNT 3 ACCOUNT 4 ACCOUNT 5 ACCOUNT 6

Account Active:   No      Yes
Account Name:   (e.g., MyCompany)
SIP Server:   (e.g., sip.mycompany.com, or IP address)
Outbound Proxy:   (e.g., proxy.myprovider.com, or IP address)
SIP User ID:   (the user part of an SIP address)
Authenticate ID:   (can be same or different from SIP UserID)
Authenticate Password:   (not displayed for security protection)
Name:   (optional, e.g., John Doe)
Use DNS SRV:   No      Yes
User ID is phone number:    No       Yes
SIP Registration:    No       Yes
Unregister On Reboot:    No       Yes
Support SIP Instance ID    No       Yes
Register Expiration:   (in minutes. default 1 hour, max 45 days)
local SIP port:   (default 5064)
SIP Registration Failure Retry Wait Time:   (in seconds. Between 1-3600, default is 20)
SIP T1 Timeout:  
SIP T2 Interval:  
SIP Transport:   UDP     TCP    
Use RFC3581 Symmetric Routing:   No     Yes
NAT Traversal (STUN):   No     No, but send keep-alive     Yes
SUBSCRIBE for MWI:   No     Yes
SUBSCRIBE for Registration Event:   No     Yes
PUBLISH for Presence:   No     Yes
Proxy-Require:  
Voice Mail UserID:   (UserID for voice mail system)
Send DTMF:   in-audio     via RTP (RFC2833)     via SIP INFO
Early Dial:   No       Yes (use "Yes" only if proxy supports 484 response)
Dial Plan Prefix:   (this prefix string is added to each dialed number)
BLF Call-pickup Prefix:   (this prefix is prepended when answering call with BLF key)
Delayed Call Forward Wait Time:   (Allowed range 1-120, in seconds.)
Enable Call Features:   No      Yes (if yes, call features using star codes will be supported locally)
Call Log:   Log All Calls
  Log Incoming/Outgoing only (Missed calls NOT recorded)
  Disable Call Log
Session Expiration:   (in seconds. default 180 seconds)
Min-SE:   (in seconds. default and minimum 90 seconds)
Caller Request Timer:    No       Yes (Request for timer when making outbound calls)
Callee Request Timer:    No       Yes (When caller supports timer but did not request one)
Force Timer:    No       Yes (Use timer even when remote party does not support)
UAC Specify Refresher:   UAC   UAS     Omit (Recommended)
UAS Specify Refresher:   UAC   UAS (When UAC did not specify refresher tag)
Force INVITE:    No       Yes (Always refresh with INVITE instead of UPDATE)
Enable 100rel:    No       Yes
Account Ring Tone:   system ring tone
  custom ring tone 1
  custom ring tone 2
  custom ring tone 3
Ring Timeout:   (in seconds. Between 30-3600, default is 60)
Send Anonymous:   No      Yes   (caller ID will be blocked if set to Yes)
Anonymous Method:   Use From Header      Use Privacy Header  
Anonymous Call Rejection:   No      Yes  
Auto Answer:   No      Yes  
Allow Auto Answer by Call-Info:   No      Yes  
Turn off speaker on
remote disconnect:
  No      Yes  
Check SIP User ID for
incoming INVITE:
  No      Yes  
Refer-To Use Target Contact:   No      Yes  
Disable Multiple Media Attribute in SDP:   No      Yes  
Preferred Vocoder:
(in listed order)
choice 1:  
choice 2:  
choice 3:  
choice 4:  
choice 5:  
choice 6:  
choice 7:  
choice 8:  
SRTP Mode:   Disabled      Enabled but not forced    
  Enabled and forced       Optional  
eventlist BLF URI:  
Special Feature:  

     
All Rights Reserved Grandstream Networks Inc. 2004-2009